herberttelge
Member
Need help from a builder or technician to identify why I can not get my trim to work up or down at all.
I went through all the continuity tests provided by Van's (Switches, Harness, and making the servo work properly with external 12v.power, do not get power output from the control module fuselage pin 31 & 32. suposedly the potenciometer was properly set up by Van's after I returned the controle module for a check up.
I went through all the continuity tests provided by Van's (Switches, Harness, and making the servo work properly with external 12v.power, do not get power output from the control module fuselage pin 31 & 32. suposedly the potenciometer was properly set up by Van's after I returned the controle module for a check up.