First Generation RV-12 completed in 2012 with Dynon Skyview Classic. ADS-B Out was installed a couple of years ago but has never worked. As a matter of fact, neither has the transponder. I spent around 30 minutes on the phone with Dynon tech support a few days ago in the cockpit scrolling through the setup menus. Everything appears to be fine with no errors. But when I fly toward controlled airspace, the controllers cannot see me. I'm just not transmitting, except by radio. Flightaware and FAA adsb performance websites always come up with nothing.
Does anyone have an idea where to begin troubleshooting this problem? I paid quite a bit for this system and would just like to make it work.
Does anyone have an idea where to begin troubleshooting this problem? I paid quite a bit for this system and would just like to make it work.