Just Me
Disclaimer: I take no responsibility if you follow my method. You must decide for yourself what is safe.
I had a chemist review the P60G2 MDS and she told me the quad valent chromium is bad, but the solvent is much worse for me. So when using P60G2, I wear gloves and a full respirator from the time the containers are open, until all the stuff is dry and disposed of. If I smell the stuff, it means my PPE is not good enough. I use a 3M respirator/mask and gloves. I built a simple PVC spray both with a filter for incoming air and also for outgoing air. And i spray outside.
With the good quality 3M mask, I dont smell anything. My only wish is that I have something over my eyes. right now it is just safety glasses, but the eyes are also susceptible to fumes. If I was to build again, I think I would use a better mask that also covers the eyes, like on "Breaking Bad"
JMHO YMMV.