Everything was fine when I parked the plane in my hangar a couple of weeks ago. Today everything connected by CAN is red-x’ed out. Some things working in reversionary mode - EMS display on MFD via RS-232 backup, etc.
In config mode, system information device list shows everything on CAN with 100% network error rate, although some devices such as GMU 11, GAD 13, AHRS2 will periodically show green status very briefly.
MFD not showing in device list at all. Perhaps an issue with the MFD, or the CAN wiring to the MFD?
In config mode, system information device list shows everything on CAN with 100% network error rate, although some devices such as GMU 11, GAD 13, AHRS2 will periodically show green status very briefly.
MFD not showing in device list at all. Perhaps an issue with the MFD, or the CAN wiring to the MFD?