Hi All,
As a starting point I want to use timing recommended by producer. It means I want to use the jumper to setup the timing and reduce the advance range by 4.2 degrees.
Question - should the jumper stay installed only during the ignition timing procedure and removed after the procedure is finished or permanently during the normal operation?
Thanks,
Witold
As a starting point I want to use timing recommended by producer. It means I want to use the jumper to setup the timing and reduce the advance range by 4.2 degrees.
Question - should the jumper stay installed only during the ignition timing procedure and removed after the procedure is finished or permanently during the normal operation?
Thanks,
Witold