I am having problems in wiring my Davtron D307PS (3 wires) which is connected to the davtron OAT gauge 307FC.
The tree wires are orange=data, blue=ground, white=probe power (8VDC)
I linked orange to pin 4 and white to pin 5 on the GAD 13 which gives me an OAT error, first it shows -32C and after 10 seconds then an error OAT.
Any thoughts?
The tree wires are orange=data, blue=ground, white=probe power (8VDC)
I linked orange to pin 4 and white to pin 5 on the GAD 13 which gives me an OAT error, first it shows -32C and after 10 seconds then an error OAT.
Any thoughts?