I'm having trouble obtaining the correct incidence angle on my QB -3B wings,and request help/guidance from the forum.
I have achieved all preliminary steps ie levels , sweep and triangulation but when setting the block (2.557") on the rear spar and leveling the bubble I find the bottom fairing is bent quite severely down, the rear spar attach is not in line and I have to put a considerable load on the main spar. To re leave all these I find the block would need to be approx 2.25". What are the ramification of this? What do I do? All assistance will be gratefully appreciated. Thank you.
I have achieved all preliminary steps ie levels , sweep and triangulation but when setting the block (2.557") on the rear spar and leveling the bubble I find the bottom fairing is bent quite severely down, the rear spar attach is not in line and I have to put a considerable load on the main spar. To re leave all these I find the block would need to be approx 2.25". What are the ramification of this? What do I do? All assistance will be gratefully appreciated. Thank you.