Alan George
I'm New Here
Hello All,
Drawing 27 Section B-B' shows four 2024-T3 spacers between the 'famous' weldments and the firewall to account for the 1/8" thickness of the 6061-T6 angle. How have people fixed this in place, the drawing implies a rivet through one corner or have you used Proseal?
Thanks for any help, Alan.
Here is a pdf of part of Drawing 27 with a note to show the spacers.
http://trussler.co.uk/alangeorge/DWG%2027_email.pdf
Drawing 27 Section B-B' shows four 2024-T3 spacers between the 'famous' weldments and the firewall to account for the 1/8" thickness of the 6061-T6 angle. How have people fixed this in place, the drawing implies a rivet through one corner or have you used Proseal?
Thanks for any help, Alan.
Here is a pdf of part of Drawing 27 with a note to show the spacers.
http://trussler.co.uk/alangeorge/DWG%2027_email.pdf
Last edited: