I was finally able to cleco the skin to the VS skeleton. I notice that where the middle and bottom nose rib ends are, an inch or so from the leading edge of the VS, a corner of the nose rib is poking into the skin making a distinct bump out on each side of the VS. Thus, there are 3 pairs of bumps. It is the corner of the rib end where it is elbowing into the skin.
Clearly, there is significant pressure there to create this reverse dimple. I took the ribs out and made sure to smooth and round out the outside corner on this rib and rib flange end. The bump is still clearly there.
I just wanted to check/verify if others have noticed this bump too? I am partly chalking it up to still having blue plastic on the skin. Once all the plastic is off, i am sure it will help mitigate that bump.
Was there anything special people did to make sure their skins were smooth?
Thanks for the insights,
Jae
Clearly, there is significant pressure there to create this reverse dimple. I took the ribs out and made sure to smooth and round out the outside corner on this rib and rib flange end. The bump is still clearly there.
I just wanted to check/verify if others have noticed this bump too? I am partly chalking it up to still having blue plastic on the skin. Once all the plastic is off, i am sure it will help mitigate that bump.
Was there anything special people did to make sure their skins were smooth?
Thanks for the insights,
Jae