ScottSchmidt
Well Known Member
I am going to switch from the Honeywell to the VDO oil pressure sensor with the dual terminals due to the Honeywell dying after 65 hours. We have had the Honeywell remote mounted on the firewall from the start and the VDO will be as well.
I know others have done this, can you use the same wires or is there some re-wiring involved?
The system is the Skyview and I know I need to change sensors within the Skyview.
I know others have done this, can you use the same wires or is there some re-wiring involved?
The system is the Skyview and I know I need to change sensors within the Skyview.