I'm ready to tighten my tank fittings and have only been able to find recommendations for using a torque wrench with a crow foot adapter. Since this causes an off center adjustment it has to affect the torque value setting of the wrench. I found this file from Gates that addresses how to make this adjustment. Basically just accounts for the increase in lever arm length.
http://www.gatespowerpro.com/resources/doclib/CouplingTorqueRecommendations.pdf
Also found this regarding alternate method for tightening.
http://chinookhelicopters.tpub.com/TM-55-1520-240-23-1/css/TM-55-1520-240-23-1_40.htm
http://www.gatespowerpro.com/resources/doclib/CouplingTorqueRecommendations.pdf
Also found this regarding alternate method for tightening.
http://chinookhelicopters.tpub.com/TM-55-1520-240-23-1/css/TM-55-1520-240-23-1_40.htm