Creative options
My Snap-On 1/2" breaker bar fits in the axle tube perfect, so I take the axle nut off, slide the breaker bar in handle first, put my cheapo car floor jack under it and lift the tire just off the ground, slide everything over to the breaker bar, and place a wood block under axle. No risk of wing jacks..( Had a Boeing 767 slip off jacks at day job)...that's a 3 beer story and just use your imagination. I do re-install the same way, and accomplish wheel nut torque while rolling plane back and forth. If you do the wheel nut modification it can be torqued while lifting bar is still in place.