AX-O
Well Known Member
I did a search and found some examples of wings stands but not much on building it or the parts required. You will eventually need one of these. This is what I did. Hopefully it will help someone out there. DR if this is not a tip nor needed, please delete it.
From my log:
I did this a few months ago when I had to help a friend take his RV-4 apart. I built two of the same units. This is a list of the parts required.
One (a) 2X4 6ft long (for the top)
Two (b) 2X4 69 inches long (drill them together and use on the bottom)
Two (c) 2X4 4ft long (for the sides)
Two (d) 4X6 4ft long (for the legs)
Four (e) 4X6 2ft long (side support)
Four (f) Wheels
Two (g) Pyramid shape plywood pieces
Sixteen (h) 90-degree triangle shape plywood pieces
Two (i) Pieces of old fire hose
Two Boxes of wood screws
Sixteen 1/4 inch screws (to attach wheels)
From my log:
I did this a few months ago when I had to help a friend take his RV-4 apart. I built two of the same units. This is a list of the parts required.
One (a) 2X4 6ft long (for the top)
Two (b) 2X4 69 inches long (drill them together and use on the bottom)
Two (c) 2X4 4ft long (for the sides)
Two (d) 4X6 4ft long (for the legs)
Four (e) 4X6 2ft long (side support)
Four (f) Wheels
Two (g) Pyramid shape plywood pieces
Sixteen (h) 90-degree triangle shape plywood pieces
Two (i) Pieces of old fire hose
Two Boxes of wood screws
Sixteen 1/4 inch screws (to attach wheels)