The fuel inlet hose to my Avstar Carb on a Lycoming 0 - 320 is forced to take a tight turn over the exhaust shield.
http://i39.tinypic.com/r7rhg9.jpg
I'd prefer to use a 45 degree nipple into the Carb, entering from above to avoid the exhaust. Avstar doesn't supply a 45 degree nipple, does anyone know of a supplier or foresee any problems in making this change?
http://i39.tinypic.com/r7rhg9.jpg
I'd prefer to use a 45 degree nipple into the Carb, entering from above to avoid the exhaust. Avstar doesn't supply a 45 degree nipple, does anyone know of a supplier or foresee any problems in making this change?
Last edited by a moderator: