I noticed in New Blue that since I did the latest Dynon software upgrade, my switch lights no longer work. Spoke with Ken Krueger yesterday. Here's the solution.
Get into the EMS Menu
Push "Setup"
Push "Global"
Select "Alarm config"
Select "Lgt Bhvr"
Set to "Dim Output"
Get out of menu
I tried it and it works.
Get into the EMS Menu
Push "Setup"
Push "Global"
Select "Alarm config"
Select "Lgt Bhvr"
Set to "Dim Output"
Get out of menu
I tried it and it works.