Not wishing to re invent the wheel. I thought I would ask the group for inspiration.
About to mount the next push forward.
Panel is about to be cut, Skyview 10" in front, Skyview 7" in rear.
Need help with the following for best locations please.
1. EMS box and route of sensor wires to firewall forward.
2. Remote transponder box.
3. Mounting a 7" Skyview for the rear talking freight.
4. Skyview battery box.
Thanks folks.
Mike
p.s. Steve at aircraft specialty did a really good job on the panel layout and supplied file so I can get it cut over here in Blighty.
About to mount the next push forward.
Panel is about to be cut, Skyview 10" in front, Skyview 7" in rear.
Need help with the following for best locations please.
1. EMS box and route of sensor wires to firewall forward.
2. Remote transponder box.
3. Mounting a 7" Skyview for the rear talking freight.
4. Skyview battery box.
Thanks folks.
Mike
p.s. Steve at aircraft specialty did a really good job on the panel layout and supplied file so I can get it cut over here in Blighty.