humptybump
Well Known Member
Im into my second condition inspection and have now tried a few different options for pulling (and installing all of the plugs). All attempts have been sub-optimal - especially on the top plugs (at least one is proving impossible) while attempting to use a torche wrench during installation.
My deepest socket does not allow for the torche wrench to fit on. My shallower sockets wont catch the faces of the plug. My open ended wrench does not fit. My box end wrench hits the fins.
What tool, trick, or fabrication have you found to work? Pictures welcome !
BTW: in my case, the plugs have the wrench point at the base, just above the threads (worse case scenario).
My deepest socket does not allow for the torche wrench to fit on. My shallower sockets wont catch the faces of the plug. My open ended wrench does not fit. My box end wrench hits the fins.
What tool, trick, or fabrication have you found to work? Pictures welcome !
BTW: in my case, the plugs have the wrench point at the base, just above the threads (worse case scenario).