NYTOM
Well Known Member
A little foggy here. What rivets are used on the sides where the top F-671 skin meets the side F-670 skin. I know on each side the front 7 rivets are AD4-7 that continue through the Wd-602 but what's used behind them along the edge all the way to the cockpit edge. I've seen some conflicting info so I'd like to clear this up. Have seen some builders web site photos that look a awful lot like they used pulled rivets in that location. It sure would make it easy to finish since I don't have a rivet buddy but would rather do it as Van would. Went over my photos from Osh but those planes are so nice that even if they did have pulled rivets I sure they would have finished them with epoxy. Any 6 guys out there remember that area?