jliltd
Well Known Member
Here is what I have drawn up for my RV-3B. I have a Garmin GTR200 new in box in the hangar. At OSH I purchased a Garmin G5, two GMA28 autopilot servos, a GMC 307 autopilot panel and a Navworx ADS-600-EXP receiver (UAT). I have a GTX 337 Mode C transponder and will use the G5 for altitude encoding.
I went Navworx because I refuse to have 1090 out (Mode S, Mode ES etc) and am strictly a UAT with anonymous mode kind of guy. If I ever want "in" for my Garmin stuff I have a GDL-3D I can slap on the glareshield.
So here is a schematic cartoon I made up of how to set things up (save and except audio circuits). Comments?
Thanks,
Jim
I went Navworx because I refuse to have 1090 out (Mode S, Mode ES etc) and am strictly a UAT with anonymous mode kind of guy. If I ever want "in" for my Garmin stuff I have a GDL-3D I can slap on the glareshield.
So here is a schematic cartoon I made up of how to set things up (save and except audio circuits). Comments?
Thanks,
Jim
Last edited: