RV-14 Tail/Cone Discussion/Pics
Thought I would start this thread for a discussion of the construction of the tail section. On page 07-03 the Rudder Horn R-405PD as depicted shows 9 #30 holes on the part that attaches to the spar. In reality the rudder horn only has 7 #30 holes on the part that attaches to the spar. Although the plans do not mention this, the missing holes should be #30 match drilled (per vans technical support). Do the match drilling while completing step three on page 07-03.
Thought I would start this thread for a discussion of the construction of the tail section. On page 07-03 the Rudder Horn R-405PD as depicted shows 9 #30 holes on the part that attaches to the spar. In reality the rudder horn only has 7 #30 holes on the part that attaches to the spar. Although the plans do not mention this, the missing holes should be #30 match drilled (per vans technical support). Do the match drilling while completing step three on page 07-03.
Last edited: