1001001
Well Known Member
Does anyone have a list of the arms/positions of particular parts of the RV-10, such as the instrument panel, various bulkheads, etc.? Is there a real enough difference from aircraft to aircraft that these aren't published? It seems with a pre-punched kit, there could only be a few thousandths of an inch of a difference in these positions.
I ask because I don't see a good and reliable way to measure everything from the datum, which references the wing leading edge and is placed at an imaginary point forward of the aircraft. I suppose the wing leading edge could be marked on the sides of the fuselage and reference measurements be taken from those marks.
I ask because I don't see a good and reliable way to measure everything from the datum, which references the wing leading edge and is placed at an imaginary point forward of the aircraft. I suppose the wing leading edge could be marked on the sides of the fuselage and reference measurements be taken from those marks.