JeremyL
Well Known Member
Good morning everyone, I have just mounted the elevators to the horizontal stabilizer (big moment!!) and as you can see in the picture the inboard edge of the elevator is contacting the HS. The condition is present bilaterally. The rod end bearings are screwed in per plan measurements. My initial thought to correct this would be to back the inboard bearing out a turn or so. But before I mess with it I wanted to see if you all had any thoughts and or ideas about this. I look forward to hearing. The contact is at the very end of travel, maybe the last half inch or so. Thank you very much and HAPPY VETERANS DAY, thank you to all of you who have served to protect us and make America what it is!