I'm getting ready to rivet top wing skins and was planning to train one of my neighbors to buck or drive. But then I heard builders have done the top skins by themselves, similar to the bottom skins.
Have any of you done it that way and how did it work out? The plans call for starting in the middle of the panel and working out, which would require two people. But I figure doing it alone I would have to start at the main spar and work aft.
Have any of you done it that way and how did it work out? The plans call for starting in the middle of the panel and working out, which would require two people. But I figure doing it alone I would have to start at the main spar and work aft.