Anyone have issues with their prop flange bushings? I have one that needs to come out . . and when I looked close it appears 2 others are not fully seated.
I tried the bolt through the bushing with stacked washers "trick" to try and pull the unseated bushings in place but just end up deforming the washers I am using to bridge the gap over the stacked washers.
Anyone had to pull bushings? How hard to you need to pull?
Thanks Mike
https://lh3.googleusercontent.com/I...QERqnW0DtDX5RR6KK0xYrsYBu74xBvLc=w480-h640-no
https://lh3.googleusercontent.com/w...xNus1tQNrXfIHSMiNPIWCnf_gAb8K4-Q=w480-h640-no
I tried the bolt through the bushing with stacked washers "trick" to try and pull the unseated bushings in place but just end up deforming the washers I am using to bridge the gap over the stacked washers.
Anyone had to pull bushings? How hard to you need to pull?
Thanks Mike
https://lh3.googleusercontent.com/I...QERqnW0DtDX5RR6KK0xYrsYBu74xBvLc=w480-h640-no
https://lh3.googleusercontent.com/w...xNus1tQNrXfIHSMiNPIWCnf_gAb8K4-Q=w480-h640-no