Hello all,
Getting ready to install the platenuts for the tank attach screws on the main wing spar flanges (-8). I'm confused about which platenuts are which... When I inventoried the kit, I had 210 in a bag that matched up with the K1100-8's for the tank attach screws. But now that I'm getting ready to install them (countersinking was done first, using a backing plate), I'm not sure that I have the right ones.
in the picture below, the one on the left is what I have 210 of, that were labeled as K1100-8. The middle was in a bag that matched up with K1000-8 (only have about 35 of them). But then the one on the right matches up with a K1100-8 (only have about 15-20 of them).
Can someone help me figure out if I have the right ones? The ones on the left in the picture will fit, since the holes are already countersunk, but I don't want to use the wrong ones and have to drill them out.
Thanks much!
Getting ready to install the platenuts for the tank attach screws on the main wing spar flanges (-8). I'm confused about which platenuts are which... When I inventoried the kit, I had 210 in a bag that matched up with the K1100-8's for the tank attach screws. But now that I'm getting ready to install them (countersinking was done first, using a backing plate), I'm not sure that I have the right ones.
in the picture below, the one on the left is what I have 210 of, that were labeled as K1100-8. The middle was in a bag that matched up with K1000-8 (only have about 35 of them). But then the one on the right matches up with a K1100-8 (only have about 15-20 of them).
Can someone help me figure out if I have the right ones? The ones on the left in the picture will fit, since the holes are already countersunk, but I don't want to use the wrong ones and have to drill them out.
Thanks much!