Today I did the 10-hour oil change on my newly overhauled engine (actually IRAN, but replaced all 4 cylinders with reconditioned cylinders). I looked into each cylinder with my new VA400, and took three pictures of each. (1) valves, (2) piston face and (3) cylinder wall.
I think the valves look like they should. Should be concerned that the brownish colour of the cylinder walls indicates glazing? I don't know how i could possibly be glazed- CHTs never got over 400 and i don't seem to have high oil consumption.
Would any of you folks with experienced eyes mind having a look at my images? Links to folders with images for each cylinder on my onedrive:
Cyl 1: https://1drv.ms/f/s!Ai6PWykPTN6oqo5tQJ_tkeiJWALPKg?e=9ZVIjt
Cyl 2: https://1drv.ms/f/s!Ai6PWykPTN6oqo5yuTHT80SD_KDd5w?e=MiEkLm
Cyl 3: https://1drv.ms/f/s!Ai6PWykPTN6oqo52e-9tcbshnxiEYQ?e=ZgIaVt
Cyl 4: https://1drv.ms/f/s!Ai6PWykPTN6oqo56rkA8pSU5n8di8g?e=LW6Wyg
I think the valves look like they should. Should be concerned that the brownish colour of the cylinder walls indicates glazing? I don't know how i could possibly be glazed- CHTs never got over 400 and i don't seem to have high oil consumption.
Would any of you folks with experienced eyes mind having a look at my images? Links to folders with images for each cylinder on my onedrive:
Cyl 1: https://1drv.ms/f/s!Ai6PWykPTN6oqo5tQJ_tkeiJWALPKg?e=9ZVIjt
Cyl 2: https://1drv.ms/f/s!Ai6PWykPTN6oqo5yuTHT80SD_KDd5w?e=MiEkLm
Cyl 3: https://1drv.ms/f/s!Ai6PWykPTN6oqo52e-9tcbshnxiEYQ?e=ZgIaVt
Cyl 4: https://1drv.ms/f/s!Ai6PWykPTN6oqo56rkA8pSU5n8di8g?e=LW6Wyg