Pilot135pd
Well Known Member
I'm starting to program a new MGL Extreme EMS system (version 2) and have this issue:
Normally I would see Manifold Pressure with the engine off the same as ambient. I adjusted the MAP calibration factor to the maximum (page 36) and with an ambient pressure of 30.06 the best I can get is 29.2.
Any ideas why or how to correct it?
Normally I would see Manifold Pressure with the engine off the same as ambient. I adjusted the MAP calibration factor to the maximum (page 36) and with an ambient pressure of 30.06 the best I can get is 29.2.
Any ideas why or how to correct it?