AlexPeterson
Well Known Member
Mag hole covers leaking oil?
Several of us have had some difficulties getting the aluminum covers supplied by Lightspeed to seal properly against nuisance oil leaks. They do not seal using standard magneto gaskets, unless one goops them up with a gasket sealer. This solution might be the best:
I simply machined a groove in the face for a #152 Oring.
Several of us have had some difficulties getting the aluminum covers supplied by Lightspeed to seal properly against nuisance oil leaks. They do not seal using standard magneto gaskets, unless one goops them up with a gasket sealer. This solution might be the best:
I simply machined a groove in the face for a #152 Oring.
Last edited: