Charles in SC
Well Known Member
I bought the fairings that Van's sells. They were made on a male mold so they are slick on the inside and the outside has the rough fabric weave.
My question is what is the best way to slick them up on the outside?
It seems that the options that I can think of are to spread a coat of micro slurry on and sand smooth. I also have some very light glass deck cloth. I could put a layer of this cloth on it and then smooth it over with micro slurry.
Any other ideas are welcome.
My question is what is the best way to slick them up on the outside?
It seems that the options that I can think of are to spread a coat of micro slurry on and sand smooth. I also have some very light glass deck cloth. I could put a layer of this cloth on it and then smooth it over with micro slurry.
Any other ideas are welcome.