Av8rRob
Well Known Member
Ok guys, I'm riveting the elevator together and I grabbed the k1000-6 nut plates called for on page 09-16 of the rv-14. I then verified the parts on page 05-30 (hardware reference). The problem is the parts I think are k1000-6's look more like the k1000-5 which is shown above it. The difference is the tabs with the rivet holes are straight on the manual but mine are tapered? I checked my shipping inventory and no k1000-5's were supposed to be included. I also verified that the m3614m rod end bearing fit. Small difference but hey, better safe than sorry. My guess is that either the manual needs an update (new supplier?) or I'm totally wrong.