EDIT: I thought I'd use this thread for my baffle questions since there seem to be a lot of baffling baffles
The good folks at Van's tech support are off to Oshkosh and I really would like to progress this baffle installation over the weekend....
I'm a little confused on how the forward left inlet ramp support is supposed to work. I didn't't read the description as well as I should and may have got ahead of myself. I trimmed all the hatch area away before fitting the CB-702E/M.
Earlier I adjusted the inlet ramp until it touched the front of the lower cowl, then made the diagonal bend so the rest of the ramp meets the cowl.
My conundrum is that now the inlet ramp CB-1002A is nowhere near touching the CB-702E/M suport.
What am i missing?
The good folks at Van's tech support are off to Oshkosh and I really would like to progress this baffle installation over the weekend....
I'm a little confused on how the forward left inlet ramp support is supposed to work. I didn't't read the description as well as I should and may have got ahead of myself. I trimmed all the hatch area away before fitting the CB-702E/M.
Earlier I adjusted the inlet ramp until it touched the front of the lower cowl, then made the diagonal bend so the rest of the ramp meets the cowl.
My conundrum is that now the inlet ramp CB-1002A is nowhere near touching the CB-702E/M suport.
What am i missing?
Attachments
Last edited: