Anyone done it and can report if it was painful to go out of sequence? I just installed j channel after ribs, per plans, and ended up with rivets I'll need to drill out on the j channel.
Issue i see with doing j stiffener first is needing to twist ribs sideways upon install and possibly creating a proseal mess. Figured I'd see if anyone has gone out of order and can say "bad idea" or "worked out great".
Issue i see with doing j stiffener first is needing to twist ribs sideways upon install and possibly creating a proseal mess. Figured I'd see if anyone has gone out of order and can say "bad idea" or "worked out great".