Cth6
Well Known Member
Icom A200 with aux input on one channel connected to audio out from AV-30. A200 connected to PM1000 intercom.
Did some research and could not find anything on the expected behavior of the aux input. Hoping someone that has\had a similar setup could comment.
What I am experiencing.
* The aux audio is always on. RX from the radio is blended with the Aux audio at the same volume. It does not get muted if I am receiving.
*When TX over the radio, the Aux audio is not transmitted.
TIA
Did some research and could not find anything on the expected behavior of the aux input. Hoping someone that has\had a similar setup could comment.
What I am experiencing.
* The aux audio is always on. RX from the radio is blended with the Aux audio at the same volume. It does not get muted if I am receiving.
*When TX over the radio, the Aux audio is not transmitted.
TIA
