I am in the process of overhauling my panel, and installed 2 hdx dynon displays. Putting everything back together, nearly done, and now I have a constant loud static and RX displayed on the icom 220 at all times.
I installed an auxillary audio line into the harness on the icom, but even disconnected does the same thing. Even with nothing else running, still have the constant RX. Adjusted all the setting I could find in the manual with no avail.
Any ideas?
I even put on an RFI magnet around the coax cable.
I installed an auxillary audio line into the harness on the icom, but even disconnected does the same thing. Even with nothing else running, still have the constant RX. Adjusted all the setting I could find in the manual with no avail.
Any ideas?
I even put on an RFI magnet around the coax cable.