AboveMSL
Well Known Member
I somehow created a small ridge (for lack of a technical word) in the HS skin while riveting the HS707 rib to the top side of the skin. I'm not sure how I did this, I suspect I had the edge of the bucking bar lightly touching underneath this area when I started pounding. The ridge is about 7/32 in. long and at most 1/64 in. high. Though I'm inexperienced, this definitely strikes me as a concern for the location of a future crack.
I'm wondering what can be done about it and would appreciate any and all suggestions.
Pictures here:
http://gallery.me.com/tilf#100203&bgcolor=black&view=grid
As always, thanks,
Greg
I'm wondering what can be done about it and would appreciate any and all suggestions.
Pictures here:
http://gallery.me.com/tilf#100203&bgcolor=black&view=grid
As always, thanks,
Greg
Last edited: