GoingHawgWyld
Member
I am at the point of mounting my horizontal stabilizer. Per the plans there is a 1/8 shim under the front which I have installed and set the horizontal stabilizer parallel to the top fuselage longeron. I was talking to another RV builder who said he read that one should change the horizontal stabilizer incidence to add a slightly more nose down pitch by now increasing the spacer to 1/4 inch? I have already drilled all the holes so pretty much changing the incidence will be by spacer at this point? I have searched in this forum and really have found nothing concrete... Is this something I should do now if in fact this is true or wait until I fly it and see if it is needed?
Ken
Ken