I am needing to change out oil cooler on my RV8 and trying to see what the best option is. I am in Texas so optimum cooling is important. I was running a PosiTech 4215 mounted to baffling behind #4 before it broke a flange. Searched through the VAF archives on this first but most of the threads I found were pre 2010 and many of these coolers like PosiTech and Harrison are no longer around.
I was looking at the Aero Classics HE Series Part #8001599 (8 row 6" long core) this is an $875 unit. From my understanding this is a former Stewart Warner unit that is now Aero Classics.
There was also an Aero Classics Remote Mount 9 Row Part #8000074 for around $390.
Both of these look very similar. From all I can tell the HE series is a "Bar & Plate" design and the Remote Mount is a "Drawn Cup". Not exactly sure of the difference and if one is much more superior to the other.
Does anyone have any experience in using either of these in a hot climate and have any recommendations for io-360 angle valve?
I was looking at the Aero Classics HE Series Part #8001599 (8 row 6" long core) this is an $875 unit. From my understanding this is a former Stewart Warner unit that is now Aero Classics.
There was also an Aero Classics Remote Mount 9 Row Part #8000074 for around $390.
Both of these look very similar. From all I can tell the HE series is a "Bar & Plate" design and the Remote Mount is a "Drawn Cup". Not exactly sure of the difference and if one is much more superior to the other.
Does anyone have any experience in using either of these in a hot climate and have any recommendations for io-360 angle valve?