VA-153
Van's has TWO different governor cable brackets. The VA-183 is the one they recommend for the MT Governor. The VA-153 is the one that I am flying on my Woodward governor.
I purchased TWO of the PCU5000 group buy governors. One is to replace my Woodward on my O-320 when I overhaul the engine. The other is for an O-360 engine core that I plan to build up for RV use.
I just received both of the governor cable brackets that Van sells. Matching the governor cable bracket up with the PCU5000, I like the way the VA-153 bracket fits the best. The VA-183 would use the same mounting studs that mount the governor. It looks like it may work but would need spacers (at least 2 washers on each stud) on the governor to fit correctly. The base across the governor is RAISED UP higher than where the counter-bores are for the washers and nuts.
I just did the test fit and though I would look to see if anyone else has made a determination about which will work the best. I see that others have posted that Van's bracket would work but no one listed Van's Part Number for the bracket that fits best. IMHO, if you have not purchased a bracket for the PCU5000, order the VA-153 for the best fit. On the Woodward governor, the 6-screws that are safety wired can be loosened to rotate the arm to the clock in the direction that works best for your installation.