Cliff Goldstein
Member
message comes up when turning left through 90 degrees or right through 210 degrees. then goes away after a few seconds.
have calibrated with no issues always checks out, done mine with engine running. I could try doing with engine off to see if it makes a difference. thank youRV14 INSTALLAION ERROR verified wiring, AHRS pitch and roll aircraft level, aircraft passes all tests but comes up with anomly when passing through 90 degrees in left turn and 210 in right turn. usually a turn of 90 degrees thru those headings. Rate of turn doesn't affect message coming up. Temp probe co located in same bay. Heading remains accurate inspite of message coming up. the fact that the message comes up repeatedly is different from other similar errors. A second GDU22 was tested with the same results indicating location or wiring. Location is per the wing build plans and we have two other RV14's witht he same installation without issue. appreciate any suggestions as to next step.
thank you,
cliff