I just got the seriel PC interface version so it has the sub D connector and the 12 V cigarette adapter still attached.
It has no pin out or color coded wire information. No surprise.
If I cut the connectors off to get to bare wire, I'm not sure I'll be able to figure the signal wires later. Anyone done this already and know what signal wire goes to what location on the Horizon and which is the ground?. I already have an external GPS so this would be a secondary GPS source. I'm trying to minimize the wasted time at the airport figuring this by trial and error and would rather get the wires pre terminated before I leave the house so I can get some flying in too to try it out.
thx.
It has no pin out or color coded wire information. No surprise.
If I cut the connectors off to get to bare wire, I'm not sure I'll be able to figure the signal wires later. Anyone done this already and know what signal wire goes to what location on the Horizon and which is the ground?. I already have an external GPS so this would be a secondary GPS source. I'm trying to minimize the wasted time at the airport figuring this by trial and error and would rather get the wires pre terminated before I leave the house so I can get some flying in too to try it out.
thx.