I began work on the forward baggage door today and immediately ran into a problem. The F-873B and F-873C ribs are not symmetric and as a result the F-873C rib is shorter than the F-873B rib. The two ribs have different curves. This results in the F-873C rib not being long enough to reach the last hole in the baggage door skin.
Here are some photos showing what I'm talking about:
Has anyone encountered this before? By the way, my kit is the original kit, not the -1 version.
Here are some photos showing what I'm talking about:
Has anyone encountered this before? By the way, my kit is the original kit, not the -1 version.