I foolishly forgot to install the flaps for fitting when I did my initial wing fitting and cover panel fitting. I figured that I would do any flap trimming after final wing mounting at the airport. However, the fuselage will be painted by that time. I am assuming that I will be able to put some tape over the paint and have no problems with scratches. Is there anything I missing here? Any "gotcha's" that will prevent me from pulling this off? I can't visualize any, but I haven't done this on a 10 before.
Currently seeing sub-0 weather, so this won't be happening on my driveway again any time soon.
Larry
Currently seeing sub-0 weather, so this won't be happening on my driveway again any time soon.
Larry