I am installing the flap on my finished left wing and after clamping and drilling the wing side hinge it has moved slightly such that the trailing edge of the flap is now not aligned with the trailing edge of the aileron (off by about 3/32 ), Is this a problem, I have not riveted the hinge on yet so I can order another hinge and try again.
I also notice that the gap between the top skin trailing edge and the flap (in the neutral aileron aligned position which I assume is up) is not constant along the length of the flap (smaller gap outboard than inboard) is this common.
Thanks for feedback
I also notice that the gap between the top skin trailing edge and the flap (in the neutral aileron aligned position which I assume is up) is not constant along the length of the flap (smaller gap outboard than inboard) is this common.
Thanks for feedback