I sealed the pvc ribs in my -10 elevator and trim tabs 17 days ago. I mixed up a batch for the elevators and mixed up a separate batch for the trim tabs. The elevators cured fine, but after a week of the tabs not curing at room temperature, I became worried. They have been sitting in front of a space heater that is keeping them at a constant 100 degrees for four days now and they are the little bit of sealant that I can poke with a little screw is still as gooey as it was the day I installed the ribs.
I'm thinking that the digital scale I used gave me a false reading. The color of the sealant is also lighter than what I feel a properly mixed ratio would provide.
Is there any remedy that I can do before I open these tabs back up and attempt to clean all the old sealant out?
I'm thinking that the digital scale I used gave me a false reading. The color of the sealant is also lighter than what I feel a properly mixed ratio would provide.
Is there any remedy that I can do before I open these tabs back up and attempt to clean all the old sealant out?