I keep reading about ELT antenna cable routing and antenna placement and I’ve seen more than one comment (some from a DAR) that the ELT coax should not be run through a bulkhead. However this is exactly what the plans call for - see photos below.
Where is everyone running their cables?
I could continue to run it down the c channel longeron, but just out and around the bulkheads but I’m worried the length will be too short. Any other suggestions for a better routing? Or is the plans routing fine?
Here are a couple of images from the plans:
https://photos.app.goo.gl/mF2K3T3byDymxRW39
https://photos.app.goo.gl/F4ehcDhiaRype6ua7
Where is everyone running their cables?
I could continue to run it down the c channel longeron, but just out and around the bulkheads but I’m worried the length will be too short. Any other suggestions for a better routing? Or is the plans routing fine?
Here are a couple of images from the plans:
https://photos.app.goo.gl/mF2K3T3byDymxRW39
https://photos.app.goo.gl/F4ehcDhiaRype6ua7