acam37
Well Known Member
I've been rebuilding a -4 for nearly a year now. It came time to re-mount the engine using new Lord Mounts with the same part # as the old ones. No matter what we do they will not align properly. I didn't pay much attention to the old mounts when removed but by looking at them it appears they were also mis-aligned. This engine is an older 0-320-E2G. It appears the engine mount might not be the right one for this engine, but not being the original builder I have no idea what was ordered with the kit. Comments or advise would be greatly appreciated.
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
Notice there is a spacer between the engine and bushing. We thought of removing it, but that would place the fuel pump right against the firewall and the engine mount itself would hit the engine, so that is no longer an option.
Notice there is a spacer between the engine and bushing. We thought of removing it, but that would place the fuel pump right against the firewall and the engine mount itself would hit the engine, so that is no longer an option.