21779 said:i need guidence on installing rear controls in a completed rv-4. I know this has been done with some success by someone and i am trying not to reinvent the wheel, just inprove it. Thanks Russell
Dayton Murdock said:Hi Russell
I used SMCT2L quadrants from DJM Mfg Inc.They are avaible from Aircraft Spruce and direct from DJM Mfg.
Dayton Murdock said:Hi Charlie
This is the only image that I have of the quadrant mount. I made a hat section and rivited it to the side skin. Before doing that I installed some nut plates to the inside of the hat section so I could bolt the quadrant to the the hat section.
I hope this answers your question. Best of luck
Dayton Murdock said:I produce the quadrants for Van's ( check my web site) the red button is a PTT button. When I am in the pattern my trim and flaps are in the grip and I can transmit with the throttle handle.