burgessbuilderMO13
Active Member
Gents
I have noticed two part numbers for the McMaster door seal material.
Pn 1120A311 and 1120A313. It looks like the difference is the thickness of the material that the seal is attached to. Which one is correct.
Also wondering if the material removed fron the standard door opening area to accomodate the seal causes any appreciable strength loss in that area.
Last, I notice that in Vans catalogue for engines , there is a after one of the 540 model numbers, What does the stand for.
Just finishing a 12 now, sold my 6A a month ago.
Thanks to all .
Dale
I have noticed two part numbers for the McMaster door seal material.
Pn 1120A311 and 1120A313. It looks like the difference is the thickness of the material that the seal is attached to. Which one is correct.
Also wondering if the material removed fron the standard door opening area to accomodate the seal causes any appreciable strength loss in that area.
Last, I notice that in Vans catalogue for engines , there is a after one of the 540 model numbers, What does the stand for.
Just finishing a 12 now, sold my 6A a month ago.
Thanks to all .
Dale