I was having difficulty cutting my rudder stops with my tabletop bandsaw. Took forever and would warm the material even while using lubricant. Upon examination the blade looked pretty well used and abused over the last year. Since they are 62" long I can't usually find local 24 tpi blades so I decided to order a few replacements online. Opened the mailbox today and there were my sawblades, sitting patiently waiting to be called to action. I installed one and started cutting the remaining cuts on the stop, a diagonal one that went thru a lot of material. Wow. Took seconds. Effortless. Saw blades and drill bits always seem to get replaced only after I realize I should have done it a long time ago.
Jeff
Jeff