subpar_bucker
Well Known Member
I was hoping that I could get a few folks to look over how I've routed the pitot tube on my 12iS. Here are some pictures:
https://photos.app.goo.gl/1oNqubLaobQC5hXv7
I was having an issue deciphering the plans:
https://www.vansaircraft.com/wp-content/uploads/2020/02/47AiS-12iS.pdf
page 3. If you look at my album above, you can see where I pointed with my finger - that's where I actually inserted the tube initially and routed the end to the front of the plane. Then I pulled the tube far enough forward that I could grab the aft portion with a hook I made with some wire and pulled it back through the firewall.
Any suggestions welcome.
https://photos.app.goo.gl/1oNqubLaobQC5hXv7
I was having an issue deciphering the plans:
https://www.vansaircraft.com/wp-content/uploads/2020/02/47AiS-12iS.pdf
page 3. If you look at my album above, you can see where I pointed with my finger - that's where I actually inserted the tube initially and routed the end to the front of the plane. Then I pulled the tube far enough forward that I could grab the aft portion with a hook I made with some wire and pulled it back through the firewall.
Any suggestions welcome.